BTPTD - SX0143, AMORPHOUS SILICA, PRECIPITATED SILICIC ACID
- MSDS: BTPTD
- Manufacturer: EM SCIENCE
- Product Name: SX0143, AMORPHOUS SILICA, PRECIPITATED SILICIC ACID
- National Stock Number: 6810-00N045557
Product Identification
Product ID:SX0143, AMORPHOUS SILICA, PRECIPITATED SILICIC ACID
MSDS Date:08/14/1991
FSC:6810
NIIN:00N045557
MSDS Number: BTPTD
Responsible Party
GIBBSTOWN, NJ 08027
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 609-354-9200
Cage: DO242
Contractor
Telephone: 800-424-9300 (CHEMTREC)
Cage: DO242
Ingredients
SILICA GEL
CAS: 63231-67-4
RTECS: VV7340000
Fraction By Weight: 100%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY IRRITATE EYES ON CONTACT.
PROLONGED OR REPEATED INHALATION OF DUST MAY CAUSE DAMAGE TO
RESPIRATORY SYSTEM. PROLONGED SKIN CONTACT MAY CAUSE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RESPIRATORY CONDITIONS.
First Aid
First Aid:GET MEDICAL ASSISTANCE FOR ALL CASES OF OVEREXPOSURE.
SKIN:WASH THOROUGHLY W/SOAP & WATER. EYES:IMMEDIATELY FLUSH
THOROUGHLY W/WATER FOR AT LEAST 15 MINUTES. INHAL:REMOVE TO FRESH
AIR; GIVE ARTIFICIAL RESPIRATION IF BREATHING HAS STOPPED.
INGEST:GET IMMEDIATE MEDICAL ATTENTION, IF CONSCIOUS, GIVE WATER
FREELY.
Fire Fighting
Flash Point:NONCOMBUSTIBLE
Extinguishing Media:ANY SUITABLE FOR SURROUNDING MATERIALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE INDICATED.
Accidental Release
Spill Release Procedures:EVACUATE AREA OF ALL UNNEC PERS. WEAR SUITABLE
PROT EQUIP LISTED UNDER EXPOS/PERSONAL PROT. ELIM ANY IGNIT SOURCES
UNTIL AREA IS DETERM TO BE FREE FROM EXPLO/FIRE HAZS. CONTAIN RELS
& ELIM ITS SOURCE, IF THIS CAN BE DONE W/OUT RISK. TAKE UP
&(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED. DO NOT BREATHE
DUST. DO NOT GET IN EYES. AVOID PROLONGED OR REPEATED SKIN CONTACT.
DO NOT TAKE INTERNALLY.
Other Precautions:WHEN POURING INTO CONTAINER OF FLAMMABLE LIQUID,
GROUND BOTH CONTAINERS ELECTRICALLY TO PREVENT STATIC SPARK. DUST
IRRITATING. HYGROSCOPIC.
Exposure Controls
Respiratory Protection:IF WORKPLACE EXPOS LIM(S) OF PROD/ANY COMPONENT
IS EXCEEDED, NIOSH/MSHA APPRVD AIR SUPPLIED RESP IS ADVISED IN
ABSENCE OF PROPER ENVIRON CONTROL. OSHA REGS ALSO PERMIT OTHER
NIOSH/MSHA APPRVD RESPS (N EG PRESS TYPE) UNDER SPECIFIED (SUPDAT)
Ventilation:MATL SHOULD BE HNDLD/TRANSFERRED IN APPRVD FUME HOOD/WITH
ADEQ VENT. ENGINEERING &/OR ADMIN CONTROLS SHOULD BE (SUPDAT)
Protective Gloves:BUTYL, NATURAL RUBBER, NEOPRENE,(SUPDAT)
Eye Protection:ANSI APPROVED CHEM WORK GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & SAFETY EQUIPMENT
SHOULD BE READILY AVAILABLE.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
SPILL PROC:CONTAINERIZE FOR PROPER DISP AS DESCRIBED UNDER DISP. COMPLY
W/FED, STATE & LOC REGS ON REPORTING RELS. RESP PROT:CNDTNS (SEE
YOUR SAFETY EQUIP SUPPLIER). VENT:IMPLEMENTED TO REDUCE EXPOS.
PROT GLOVES:PVC/EQUIV GLOVES SHOULD BE WORN TO PVNT SKIN CONT WHICH
COULD CAUSE SKIN IRRIT/ALLERGIC RXN.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:3110F,1710C
Spec Gravity:2.2 (H2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE (EXCEPT INDICATING GRADES) CRYSTALS, POWDER,
GRANULES; ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
HYDROFLUORIC ACID.
Stability Condition to Avoid:DUSTING, MOISTURE. HEATING >600F (WILL
DESTROY DESICCANT PROPERTIES).
Hazardous Decomposition Products:NONE INDICATED.
Disposal
Waste Disposal Methods:MATL DOES NOT HAVE AN EPA WASTE NUMBER & IS NOT
A LISTED WASTE, HOWEVER CONSULTATION W/PERMITTED WASTE DISPOSAL
SITE (TSD) SHOULD BE ACCOMPLISHED. ALWAYS CONTACT PERMITTED WASTE
DISPOSER (TSD) TO ASSU RE COMPLIANCE W/ALL CURRENT LOC, STATE & FED
REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.